Predator and the Army Painter review

Today’s post is a bit of a mish-mash of the various things I’ve been painting over the last couple of weeks. The gap between posts is still too large for my liking but I’m slowly getting there.

Predator

First of all lets start with the Predator. As with the other predators I’ve painted this is a figure from predastore.ch┬ásent over by a regular client.

P1000622

 

its a stunningly cast figure, with little to no mould lines or imperfections, and the sculpting is second to none. It does have quite a simple base compared to the other figures but this is a good thing, you want the focus on the miniature itself.

The small section of rock with the skull attached comes with the miniature and as this one was required to match a carnosaur I’d done previously I added a small amount of mud to the base with trampled leaves and grass.

P1000621

 

The mud is a mix I’ve been playing around with for the last few months trying to get something that looks right. Eventually I settled on a mix of Dark Earth weathering powder (forgeworld), pva glue, rhinox hide paint (gw), a pinch of fine sand, Ard coat (gw gloss varnish) and a product called Micro Kristal-Kleer (Krasel industries, the same folks who make Micro-Sol and Micro-Set) which is supposed to be used to fill gaps on scale windows.

The mix turns into a sticky rubbery mess very rapidly so it’s best to apply asap but it does create splendid looking mud and you can squish it with a sculpting tool to create really realistic trampled surfaces.

For some reason the mix of the gloss varnish and the kristal-Kleer creates the right texture, you just need to colour it with paint to create very wet mud but I add a few extra ingredients to tone it down and add a bit of texture variation.

Army Painter review

I received this little lot from Putrid Painting the other day too (The paints, not the laptop, it’s a cracking company but I doubt they’ll send me a laptop anytime soon)

warpaint

 

this is all stuff from Army Painter, and pictured are two of their standard paints, a quickshade set, the wargamers most wanted brush set and a can of their coloured undercoat spray.

First impressions are quite good.

The brushes have a triangular shaped handle which makes them quite comfortable to use for long periods of time (I’m a full time painter, so this bit is VERY important), the ‘Most Wanted’ set includes a Drybrush, regiment brush and an insane detail brush. The drybrush is cut at an angle with slightly stiffer bristles which make it a very good tool for the job. As with any brush you use to drybrush with, it starts to splay out almost immediately but nowhere as badly as some brushes I’ve used.

The insane detail brush is ok and holds its point relatively well when painting, but the bristles are just that bit too short for my liking (personal preference more than anything), Something between the regiment brush and insane detail with a nice point to it would be perfect (I’m sure they do such a brush but I’ve only had exposure to this little batch of goodies so far).

The quickshade inks are very good indeed, they’re far softer than I had expected but not wishy washy at all, presumably designed to be used without watering down, unlike vallejo inks which are really strong and always need to be watered down (no bad points about either, each has their own merits and their place in my painting area).

The spray I’ve used only briefly but found that it will require practice to get right as its a very thick paint and you can easily destroy fine detail if you’re not careful. It’s a great idea for a product but I really don’t think its any good for beginners as its far too easy for them to ruin a model with.

And now, after I’ve made you read through all that drivel, I shall reward you with a picture of Ferrus Manus From Forgeworld. Painted this one up a couple of weeks ago but realised I haven’t put up any pictures of it up on the blog!

P1000604 P1000605 P1000606 P1000607

 

Thanks for reading!

2 thoughts on “Predator and the Army Painter review”

    1. Not too bad, I decided to go with an effect similar to the venom symbiote crawling over spider man in spiderman3 which has worked ok but I think I’d outline the ‘tendrils’ in a much darker colour if I did another one, they don’t stand out too well.

Leave a Reply

Your email address will not be published. Required fields are marked *